MANAV RACHNA INTERNATIONAL INSTITUTE OF RESEARCH AND STUDIES
(Formerly MANAV RACHNA INTERNATIONAL UNIVERSITY )
Deemed to be University under section 3 of the UGC Act,1956
Research Publications
Title of Paper | Name of Authors | Name of Journal where published | No. | Volume & Issue | Year | Pages |
Whole body active vibration control of passenger biodynamics in quarter car model under random road excitations using ANFIS gain tuned PID-super twisting control | Devdutt Singh | International Journal of Dynamics and Control | 2195-2698 | https://doi.org/10.1007/s40435-020-00623-0 | Apr-20 | https://doi.org/10.1007/s40435-020-00623-0 |
A Review on Wear Behavior of Cutting Tools During Machining of Inconel, Nimonic, and Hastelloy | Arun, Saransh and B. K. Bhuyan | Indian Journal of Science and Technology | 0974-5645 | Volume 12 , Issue 41 | Nov-19 | 1-8 |
A COMPARATIVE REVIEW OF NH3-H2O AND H2O-LiBr BASED VAPOUR ABSORPTION REFRIGERATION SYSTEMS | Pratul Thapar, Dinesh Chawla, Kapil Dalal, Harshit Nanda, Rahul Garjola | Dinesh Chawla | 0976-3105 | Volume 10, Issue 04 | Jul-19 | 7-11. |
Analysis of wear behavior and surface properties of detonation gun-sprayed composite coating of Cr3C2–NiCr–CeO2 on boron steel | J. Mehta, J. S. Grewal, K. K. Sadasivuni, and P. Gupta | Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. | 2041-3076 | Volume 233, Issue 12 | Jul-19 | 2433–3 |
A REVIEW ON THE REFRIGERATION SYSTEM POWERED BY PHOTOVOLTAIC (PV) ENERGY | Dinesh Chawla, Anil Jat, Rahul Garjola, Subham Srivastava, Kunwar Kaushal, Kevin Varghese | Engineering, IIOAB Journal | 0976-3104 | Volume 10, Issue 03 | Jul-19 | 22-26 |
The Performance Analysis of A Refining System by Using Markov Process | AMAN, ABHISHEK KUMAR, V. K. MAHNA & RAJIV KHANDUJA | International Journal of Mechanical and Production Engineering Research and Development | 2249-8001 | Volume 9, Issue 3 | Jun-19 | 525-532 |
Experiment Modeling of Response Parameters and CBN Tool Wear in Continuous and Interrupted Hard Turning of AISI D6 Tool Steel | Manoj Nayak and Rakesh Sehgal | Indian Journal of Science and Technology | 0974-5645 | Volume12, Issue 18 | May-19 | DOI: 1017485/ijst/2019/v12i18/143902 |
Performance Analysis and Optimization of Crytallization System of a Sugar Plant using Genetic Algorithm | AMAN, ABHISHEK KUMAR, V. K. MAHNA & RAJIV KHANDUJA | International Journal of Mechanical Engineering and Technology | 0976-6359 | Volume 10, Issue 05 | May-19 | 83-90 |
Hard Turning using Cubic Boron Nitride: A perspective | Manoj Nayak | International Journal of Scientific Research and Review | 2279-543X | Volume 7, Issue 4 | Apr-19 | 377-382 |
Review Of Power Generators Used In Electrical Discharge Machining Process, | Manoj Nayak and Seema Nayak | International Journal of Scientific Research and Review | 2279-543X | Volume 7, Issue 4 | Apr-19 | 388-394 |
Ride Comfort Analysis of Passenger Body Biodynamics in Active Quarter Car Model using ANFIS Based Super Twisting Sliding Mode Control | Devdutt Singh | International Journal of Dynamics and Control | 2195-2698 | Volume 25, Issue 12 | Apr-19 | 1866-1882 |
Realizing Low Cost Tooling for Reconditioning of Thread Roll | Manoj Nayak | Manoj Nayak | 2455-2143 | Volume 3, Issue 11 | Mar-19 | 19-24 |
Passenger body vibration control in active quarter car model using ANFIS based super twisting sliding mode controller | Devdutt Singh | Simulation Modelling Practice and Theory | 1569-X | Volume 89 | Dec-18 | 100-118 |
Modeling and control of passenger body vibrations in active quarter car system: a hybrid ANFIS PID approach | Devdutt Singh | International Journal of Dynamics and Control | 2195-2698 | Volume 6, Issue 4 | Dec-18 | 1649–1662 |
Comparative performance analysis of connecting rod using two distinct composite materials by FEA | Sushant, Ashish Saxena and Sunil Kumar | MR International Journal of Engineering and Technology | 0975-4997 | Volume 9, Issue 2 | Dec-18 | 19-23 |
Work Culture Enablers: Hierarchical Design for Effectiveness & Efficiency | Kumar, R., Kumar,V. and Singh, S. | International Journal of Lean Enterprise Research | 1754-2308 | Volume 2, Issue 3 | Aug-18 | 189-201 |
Integrated Fuzzy-Dematel and Fuzzy-Topsis approach for Supplier Slection: A case study | Agarwal, Narayan and Kant, Shashi | Advance research in Electrical and Electronics Engineering | 2349-5812 | Volume 5 , Issue 2 | Jul-18 | 129 – 133 |
Application of Supply Chain Management in Indian Cement Industy | Mohammad Nizamuddin, Dain D Thomas | International Journal of Scientific Research and Development | 2321-0613 | Volume 6, Issue 4 | Jul-18 | 1414-1418 |
Modeling of MRR due to Traveling Wire Electro-Chemical Spark Machining Process using FEM | Pravabati Bhuyan, Satish Mishra and Basanta Kumar Bhuyan | International Journal for Scientific Research & Development | 2321-0613 | Volume 6 , Issue 3 | Jun-18 | 2271-2276 |
Optimisation of performance and emission characteristics of CI engine fuelled with Mahua oil methyl ester–diesel blend using response surface methodology | Vinay , Bhupender Singh, Ashok Kumar Yadav | International journal of Ambient Energy | 2162-8246 | DOI: 10.1080/01430750.2018.1484804 | Jun-18 | DOI: 101080/0143075020181484804 |
Passenger Body Vibration Control in Active Quarter Car Model using Hybrid ANFIS PID Controller | Devdutt | International Journal of Intelligent Systems and Applications | 2074-9058 | Volume 10, Issue 5 | May-18 | 51-60 |
Modelling And Simulation Of A Variable Cooling System For Domestic Water Purifier | Shailesh Singh Sengar, Prateek Mittal, Sorabh | International Journal of Mechanical and ProductionEngineering Research and Development | 2249-6890 | Volume 8, Issue 2 | Apr-18 | 1265-1270 |
Static and Thermal Analysis on Mechanical Shaft Using Titanium Alloy | Rishabh, Prateek Srivastava, Atul Raj Shukla, Bhupender Singh | INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY | 2349-6002 | Volume 4 Issue 11 | Apr-18 | 1159-1165 |
Optimization of biodiesel production from Annona squamosa seed oil using response surface methodology and its characterization | Ashok Kumar Yadav, Vinay , Bhupender Singh | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | 1556-7230 | Volume 40, Issue 9 | Apr-18 | 1051-1059 |
Wear behavior of boron steel coated cerium oxide tungsten carbide cobalt coating | J. Mehta, J. S. Grewal, and P. Gupta | Journal of Applied Science and Engineering | 1560-6686 | Volume 21, Issue 4 | Jan-18 | 519–526 |
Design Approach and Fabrication of Prototype Centrifuge | Agarwal V, Pramanik D, Kant, Shashi | MR International Journal of Engineering and Technology | 0975-4997 | Volume 9, Issue 2 | Dec-17 | 24-30 |
Solving VRP in an indian transpotation firm through Clark and Wright Algorithm: A case Study | Prateek Mittal, Nikhil Garg, Himank Ambastha, Charanjeev Mehndiratta | International Journal of Emerging Technologies in Engineering and research | 2454-6410 | Volume 5, Issue 10 | Oct-17 | 163-168 |
Modeling and analysis on supply chain characteristics using ISM technique | Kumar, R., Kumar,V. and Singh, S. | Apeejay Journal of Management and Technology | 0974-3294 | Volume 12, Issue 1 | Jul-17 | 21-29 |
Active Vibration Control Of Passenger seat in Quarter car model using supertwisting controller | Devdutt | International Journal of control and automation | 2195-2698 | Volume10, Issue 11 | Nov-17 | 83-94 |
Passenger Seat Vibration Comparison Using ANFIS Control in Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume11, Issue 7 | Jul-17 | 1-1378 |
Passenger Seat Vibration Comparison Using ANFIS Control in Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 11, Issue 7 | Jul-17 | 1-1378 |
Passenger Seat Vibration Control in Active Quarter Car Model Using Bat Algorithm Based PID Controller, | Devdutt | MR International Journal of Engineering and Technology | 0975-4997 | Volume 9, Issue 1 | Jun-17 | 39-46 |
Passenger seat vibration control of a semi-active quarter car system with hybrid Fuzzy – PID approach, | Devdutt, M.L. Aggarwal | International Journal of Dynamics and Control | 2195-2698 | Volume 5, Issue 2 | Jun-17 | 287-296 |
DESIGN AND FABRICATION OF TWOWHEELER SERIES HYBRID VEHICLE | Sushant, Ashish Saxena, Rohit Borah | INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING | 2321-3051 | Volume 5 Issue.6 | Jun-17 | 1-8. |
Optimization of WEDM parameters using Taguchi Technique in machining of EN31 Tool Steel | Dain D Thomas, Sushant | Imperial Journal of Interdisciplinary Research | 2454-1362 | Volume 3, Issue 5 | Jun-17 | 864-826 |
Surface Roughness Optimization in End Milling Using Taguchi Method and Anova | Ashish Saxena, Sushant, Anubhav Khandelwal | International Journal of Research In Aeronautical and Mechanical Engineering | 2321-3051 | Volume 5, Issue.6 | Jun-17 | 9-16. |
Self-Tuning Fuzzy Control of Seat Vibrations of Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 11, Issue 5 | May-17 | 1053-1059 |
Summing ANFIS PID Control of Passenger Seat Vibrations in Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume11, Issue 5 | May-17 | 1060-1066 |
Self-Tuning Fuzzy Control of Seat Vibrations of Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 11, Issue 5 | May-17 | 1053-1059 |
Summing ANFIS PID Control of Passenger Seat Vibrations in Active Quarter Car Model | Devdutt | World Academy of Science, Engineering and Technology | 2010-3778 | Volume11, Issue5 | May-17 | 1060-1066 |
Modeling and analyzing the impact of lean principles on organizational performance using ISM approach | Kumar, R., Kumar,V. and Singh, S. | Journal of Project Management | 2371-8374 | Volume 2, Issue 1 | May-17 | 37-50 |
Experimental Investigation of Cutting Parameters influence on Surface Roughness in turning of Alloy Steel ASTM A182, Grade F91 | Vivek Jakhar, Dr Manoj Nayak, Nitin Sharma | International Journal of Advanced Research in Mechanical Engineering & Technology | 2454-4736 | Volume 3 , Issue 1 | Mar-17 | 21-25 |
A Literature Review on Optimization of Input Cutting Parameters for Improved Surface Finish in Turning Process | Vivek Jhakkar and Manoj Nayak | International Research Journal of Engineering & Technology | 2395 -0056 | Volume 4, Issue 3 | Mar-17 | 2810-2815 |
Role of thermal spray coatings on wear, erosion and corrosion behavior: A review | J. Mehta, V. K. Mittal, and P. Gupta | J. Appl. Sci. Eng. | 1560-6686 | Volume 20, Issue 4 | Jan-17 | 445–452 |
Relationship establishment between lean manufacturing and supply chain characteristics to study the impact on organizational performance using SEM approach | Kumar, R., Kumar,V. and Singh, S. | International Journal of Value Chain Management | 1741-5365 | Volume 7, Issue 4 | Nov-16 | 352-367 |
Optimization of Job Shop Scheduling with Transportation Time Using Genetic Algorithm | Sunil kumar ,Rakesh Kumar Phanden and R.V. Singh | MR International Journal of Engineering and Technology | 0975-4997 | Volume 8, Issue 1 | Jun-16 | 1-5. |
Active Vibration Control of Passenger Seat with HFPIDCR Controlled Suspension Alternatives | Devdutt, M.L. Aggarwal | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 10, Issue 5 | May-16 | 916-23 |
Active Vibration Control of Passenger Seat with HFPIDCR Controlled Suspension Alternatives | Devdutt, M. L. Aggarwal | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 10, Issue 5 | May-16 | 916-23 |
Effect of music on productivity of industrial workers engaged in repetitive work, | Manila Talwar, Sachin Marwah, Virender Narula and Sushant | International Journal of Research in Aeronautical and Mechanical Engineering | 2321-3051 | Volume 4, Issue.4 | Apr-16 | 11-19. |
Design and Comparative Performance Analysis of Multi Leaf Spring by F.E.A. | Sushant, Sahil Sardana | International Journal of Research in Aeronautical and Mechanical Engineering | 2321-3051 | Volume 4, Issue 4 | Apr-16 | 20-28 |
Industry-Academia Interaction: Way to Make in India | Kaushik, M., Kumar, R., Dodeja, D.K. and Ritu | International Journal for Scientific Research & Development | 2321-0613 | Volume 3, Issue 12 | Mar-16 | 965-967 |
Increasing Productivity by Reducing Cycle Time in Assembly line of an Automotive Industry using Work Study Techniques. | Virender Narula | International Journal of Engineering Research & Technology | 2278-0181 | Volume 5 Issue 02 | Feb-16 | 272-275 |
Finite element modeling of magnetic flux leakage from metal loss defects in steel pipeline | Sorabh, Arvind gupta, Kannan Chandrasherkhar | Journal of failure analysis and prevention | 1864-1245 | Vol 16, Issue 1 | Feb-16 | http://linkspringercom/article/101007/s11668-016-0073-6 |
Continuous and Interrupted Hard Turning Using CBN-L Tools at Moderate Cutting Speeds | Rakesh Sehgal, Manoj Nayak & Rajiv Kumar Sharma | International Journal of Emerging Technology and Advanced Engineering | 2250-2459 | Volume 5, Issue 4 | Jan-16 | 41-48 |
Active solar still | Shailesh S. Sengar, Sorabh | MR International Journal of Engineering & Technology | 0975-4997 | Volume 7, Issue 2 | Dec-15 | 56-59 |
Improving Quality of Education using Six Sigma DMAIC Methodology: A Case Study of a Self-Financed Technical Institution in India | Virender Narula | International Journal of Quality Assurance in Engineering and Technology Education | 2155-496X | Volume 4, Issue 2 | Dec-15 | 49-61 |
Fuzzy control of passenger ride performance using MR shock absorber suspension in quarter car model | Devdutt, M.L. Aggarwal | International Journal of Dynamics and Control | 2195-2698 | Volume 3, Issue 4 | Dec-15 | 463-469 |
Application of six sigma DMAIC methodology to reduce service resolution time in a service organization. Accounting | Virender Narula, Sandeep Grover | Growing Science | 2369-7407 | Volume 1, Issue 1 | Nov-15 | 43-50 |
Quality Assurance of Screw Thread through ANOVA Analysis. | Arjun Mohan Gupta, Md. Arif Sanjid,Mr.Virender Narula | International Journal of Engineering and Technical Research | 2321-0869 | Volume 3, Issue 10 | Oct-15 | 16-19 |
Relation between Metric and Whitworth Thread Through Regression Analysis. | Arjun Mohan Gupta, Md. Arif Sanjid,Mr.Virender Narula | International Journal of Engineering and Technical Research | 2321-0869 | Volume 3, Issue 10 | Oct-15 | 12-15. |
Modelling of Surface Roughness in coated Wire Electric Discharge Machining Through Response Surface Methodology | Dain Thomas, Rajeev Kumar, G.K. Singh, Prashant Sinha, Sachin Mishra | Materials Today: Proceedings | 2214-7853 | Volume 2, Issue 4-5 | Sep-15 | 3520 – 3526 |
Modelling of Process Parameters in Coated Wire Electric Discharge Machining through response Surface Methodology | Dain Thomas, Rajeev Kumar, G.K. Singh, Prashant Sinha, Sachin Mishra | Materials Today: Proceedings | 2214-7853 | Volume 2, Issue 4-5 | Sep-15 | 1642 – 1648 |
Optimization of WEDM of AISI D3 tool steel using orthogonal array with PCA | Prashant Sinha, Rajeev Kumar, G.K. Singh, DainThomas, Tushar Srivastava | Materials Today: Proceedings | 2214-7853 | Volume 2, Issue 4-5 | Sep-15 | 2512 – 2521 |
Multi-Objective Optimization of Wire EDM of AISI D3 Tool Steel using Orthogonal Array with Principal Component Analysis | PrashantSinha, Rajeev Kumar , G.K.Singh, Dain Thomas | Materials Today: Proceedings | 2214-7853 | Volume 2, Issue 4-5 | Sep-15 | 3778 – 3787 |
Mechanical Characterization and Machinability Behavior of Annealed AISI D6 Cold Working Steel | Manoj Nayak, Rakesh Sehgal and Rajiv Kumar Sharma | Indian Journal of Materials Science | Article ID 196178 | Aug-15 | 1-12. | |
Application of Attribute Gage Repeatability and Reproducibility (Gage R&R) Analysis to improve Customer Queries and Complaint Process-A Case Study in a Service Organization | Virender Narula | Journal of Advanced Research in Production and Industrial Engineering | 2456-429X | Volume 2, Issue 2 | Jul-15 | 12-16 |
Significance of rational sub grouping of data for Interpreting X bar and R Charts-A Case Study in a Service Organization | Virender Narula | Journal of Advanced Research in Production and Industrial Engineering | 2456-429X | Volume 2, Issue 2 | Jul-15 | 63-67 |
Manufacturing Systems Selection using Fuzzy AHP | Kant, Shashi | MR International Journal of Engineering and Technology | 0975-4997 | Volume 7, Issue 1 | Jun-15 | 22-28 |
Establishing the relationship among principles of Lean Manufacturing, Supply Chain Characteristics, Manufacturing Strategies and Performance theoretically in an Indian environment | Kumar, R., Kumar, V. and Singh, S. | Journal of Industrial Engineering | 0970-2555 | Volume 8, Issue2 | Feb-15 | 25-31 |
Effect of Tool Material Properties and Cutting Conditions on Machinability of AISI D6 Steel During Hard Turning | Manoj Nayak, Rakesh Sehgal | Arabian Journal of Science and Engineering | 2191-4281 | Volume 40 , Issue 4 | Feb-15 | 1151–1164 |
Simultaneous Optimization of Semiactive Quarter Car Suspension Parameters using Taguchi Method and Grey Relational Analysis | Devdutt, M.L. Aggarwal | International Journal of Recent Advances in Mechanical Engineering | 2200-5854 | Volume 4, Issue 1 | Feb-15 | 61-75 |
Managing the utility of manufacturing process facilities through Lean Supply Chain | Kumar, R., Kumar, V., Singh, S. and Threja, P. | Journal of Advance Research in Production and Industrial Engineering | 2456-429X | Volume 2, Issue 1 | Jan-15 | 13-23 |
World Class Manufacturing System: A Need of the Time | Kumar, R. and Lamba, N. | Journal of Advance Research in Production and Industrial Engineering | 2456-429X | Volume 2, Issue 1 | Jan-15 | 33-38 |
Six Sigma: Literature Review and Implications for Future Research | Virender Narula, Sandeep Grover | International Journal of Industrial Engineering | 2008-4889 | Volume 26, Issue 1 | Jan-15 | 13-26 |
Simultaneous Optimization of Semiactive Quarter Car Suspension Parameters using Taguchi Method and Grey Relational Analysis | Devdutt, M.L. Aggarwal | International Journal of Recent advances in Mechanical Engineering | 2200-5854 | Volume 4, Issue1 | Jan-15 | 61-75 |
Application of Six Sigma DMAIC Methodology for Reducing Defects in a Foundry Shop | Virender Narula, Sandeep Grover | Materials Science Forum | 1662-9752 | Volume 808 | Dec-14 | 79-87 |
Hybrid Fuzzy-PID Control of a Semi-Active Quarter Car System | Devdutt, M.L. Aggarwal | MR International Journal of Engineering and Technology | 0975-4997 | Volume 6, Issue 2 | Dec-14 | 21-26 |
Design & Fabrication of a Special Tool to Produce Square Hole | Shailesh S. Sengar , Vaibhav Raghav ,Chadaram Srinivasu | Procedia Materials Science | 2211-8128 | Volume 6 | Sep-14 | 1823-1836 |
Role of lean manufacturing and supply chain characteristics in accessing the manufacturing performance | Kumar, R., Kumar, V. and Singh, S. | International Journal of Uncertain Supply Chain Management | 2291-6830 | Volume 2, Issue 4 | Sep-14 | 219–228 |
Comparative Analysis of Passenger Ride Comfort Using Various Semi-Active Suspension Alternatives | Devdutt, M.L. Aggarwal | International Journal of Recent advances in Mechanical Engineering | 2200-5854 | Volume 3, Issue 3 | Aug-14 | 79-89 |
Comparative Analysis of Passenger Ride Comfort Using Various Semi-Active Suspension Alternatives | Devdutt, M.L. Aggarwal | International Journal of Recent advances in Mechanical Engineering | 2200-5854 | Volume 3, Issue 3 | Aug-14 | 79-89 |
Effect of Lean Principles on organizational efficiency | Kumar, R., Kumar, V. and Singh, S. | International Journal of Applied Mechanics and Materials | 1662-7482 | Volumes 592-594 | Jul-14 | 2613- 2618 |
Design and Comparative Performance Analysis of Two-Wheeler Connecting Rod Using Two Different Materials Namely Carbon 70 Steel and Aluminum 7068 by Finite Element Analysis | Sushant, Victor Gambhir | International Journal of Research in Aeronautical and Mechanical Engineering | 2321-3051 | Volume 2, Issue 6 | Jun-14 | 63-78 |
Passenger Seat Vibration Control of Quarter Car System with MR Shock Absorber | Devdutt, M.L. Aggarwal | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 8, Issue 5 | May-14 | 707-714 |
Experimental Study of Traveling Wire Electrochemical Spark Machining of Borosilicate Glass | Basanta Kumar Bhuyan and Vinod Yadava | Materials and Manufacturing Processes | 1042-6914 | Volume 29, Issue 3 | Mar-14 | 298-304 |
Experimental modeling and multi response optimization of traveling wire electro-chemical spark machining (TW-ECSM) of Pyrex glass | Basanta Kumar Bhuyan and Vinod Yadava | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 0954-4054 | Volume 228, Issue 8 | Jan-14 | 902-916 |
Passenger seat vibration control of semi-active quarter car system with fuzzy controller | Devdutt, M.L. Aggarwal | YMCAUST International Journal of Research | 2319-9377 | Volume 2, Issue 1 | Jan-14 | 6-14 |
Fuzzy Logic Control of a Semi-Active Quarter Car System | Devdutt, M.L. Aggarwal | World Academy of Science, Engineering and Technology | 2010-3778 | Volume 8, Issue 1 | Jan-14 | 163-167 |
Modeling and Optimization of Traveling Wire Electro-Chemical Spark Machining process. | Basanta Kumar Bhuyan and Vinod Yadava | International Journal of Industrial and Systems Engineering | 1748-5037 | Volume 18, Issue 2 | Jan-14 | 139-158 |
An Overview of Just-in-Time for Performance Optimization in Manufacturing System | Parvez, M. and Kant, Shashi, | Global Sci-Tech (AFJST) | Volume 6, Issue 3 | Jan-14 | 138-145 | |
Optimization of Job Shop Scheduling Using Genetic Algorithm | Sunil Kumar and R.V. Singh | MR International Journal of Engineering and Technology | 0975-4997 | Volume 6, Issue 2 | Dec-13 | 54-58 |
Experimental Modeling and Multi-Objective Optimization of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) Process | Basanta Kumar Bhuyan and Vinod Yadava | Journal of Mechanical Science and Technology | 1738-494X | Volume 27, Issue 8 | Sep-13 | 2467-2476 |
Six Sigma and Pitfalls of TQM | Virender Narula | YMCAUST International Journal of Research | 2319-9377 | Volume 1, Issue 1 | Jan-13 | 88-94 |
Comparative analysis for measures of forecast accuracy: A Case Study | Kumar, R., Lamba, N., Sharma, A., and Chugh, P. | International Journal on Emerging Technologies | 2249-3255 | Volume4, Issue1 | Jan-13 | 26-31 |
Enhancement in productivity in sheet metal industry through Lean Principles | Kumar, G., Kumar, R. and Gupta, S.K. | International Journal on Emerging Technologies | 2249-3255 | Volume4, Issue1 | Jan-13 | 186-191 |
Fuzzy Control of Seat Vibrations for Semi-Active Quarter Vehicle System Utilizing Magnetorheological Damper | Devdutt, M.L. Aggarwal | International Journal of Engineering Inventions | 2278-7461 | Volume 1, Issue 12 | Dec-12 | 51-56 |
Experimental Investigations of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) of Borosilicate Glass. | Basanta Kumar Bhuyan and Vinod Yadava | Asian Review of Mechanical Engineering | 2249-6289 | Volume 1, Issue 2 | Jul-12 | 24-29 |
New Paradigm in Machining | Manoj Nayak, Rakesh Sehgal | International Journal of Engineering & Technology | 2227-524X | Volume 4, Issue 1 | Jun-12 | 31-42 |
Lean Implementation in manufacturing industry: a case study | Gupta, S.K., Singh, R.V., Mahna, V.K. and Kumar, R. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 3, Issue 1 | Jun-12 | 13-20 |
Mixed Model Assembly Line Balancing: Strategic Tool to Improve Line Efficiency in Real world | Gupta, S.K., Mahna, V.K., Singh, R.V. and Kumar, R. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 3, Issue 1 | Jun-12 | 58-66 |
Improvement in Operational Efficiency of equipment through TPM: A case study | Gera, G., Saini, G., Kumar, R. and Gupta, S.K. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 3, Issue 1 | Jun-12 | 67-73 |
Optimizing the unevenness in production scheduling through mathematical approach: A Case Study | Gupta, S.K., Mahna, V.K., Singh, R.V. and Kumar, R. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 3, Issue 1 | Jun-12 | 74-91 |
Managing Inventory waste through Lean Tool: A case study | Gupta, S.K., Singh, R.V. and Kumar, R. | International Journal on Emerging Technologies | 2249-3255 | Volume3, Issue1 | Feb-12 | 04-17 |
An empirical study approach on TPM implementation in manufacturing industry. | Sharma, K., Gera, G., Kumar, R., Chaudhary, H.K. and Gupta, S.K. | International Journal on Emerging Technologie | 2249-3255 | Volume3, Issue1 | Feb-12 | 18-23 |
Development of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) Setup. | Basanta Kumar Bhuyan and Vinod Yadava | Journal of Engineering & Technology Education | 2229-631 X | Volume 6, Issue 2 | 2012 | 28-33 |
A Proposed Method for Error Prediction and Compensation in Hard Turning | Manoj Nayak, Rakesh Sehgal | M R International Journal of Engineering & Technology | 0975-4997 | Volume 3 , Issue 1 | Jun-11 | 34-40 |
Implementation of Taguchi Methodology for Defect Reduction in Manufacturing Industry | Kumar, R., Prajapati, D.R. and Singh, S. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 2, Issue 1 | May-11 | 01-14 |
Application of SPC tool for finding variation in the Process Output (A Case Study) | Sardana, S., Kumar, R., Bajwa, M. and Gulati, P. | International Journal of Industrial Engineering Research and Development | 0976-6987 | Volume 2, Issue 1 | May-11 | 46-58 |
Boiler Tube Failure in High Pressure Steam Generator | Binod Kumar Singh and Manoj Nayak | Journal of International Association on Electricity Generation, Transmission and Distribution ( Afro-Asian Region) | 2229-4449 | Volume 21, Issue 1 | Jun-09 | 37-47 |